It’s been a lot since latest post… the project has not stopped, but the time is missing, so blog update is confined into limited time slots. Who follows the news on Twitter, Facebook and Youtube knows that also this year MyzharBot was demoing in the Nvidia’s booth at GTC 2016 …
The first drawings of the pieces of the new MyzharBot v4 has been sent to the laser cut service… about 20 days and we can see the new track structure with the new rubber tracks.
Officine Robotiche 2015 has gone and MyzharBot v3.1.1 is ready to leave its space to MyzharBot v4. The work to reach the goal of the new version is long, but it goes on.
MyzharBot wants to be autonomous, but mostly it wants to be an autonomous OUTDOOR robot… so what is missing in MyzharBot to be a perfect outdoor Robot?
Added a new photo gallery about the new chassis of MyzharBot v3.1 ready to be fully assembled.
I published on YouTube two new videos about the unboxing of the chassis of MyzharBot v3.1 and about the first test of assembling to verify if alla the measures were correct. Everything is fine!!! You can find the video in the Videos page
Yesterday evening I received the pack from Vectorealism with the new lasercut pieces of the chassis for MyzharBot v3.1. As test I chose wood as material, but it is perfect and I am ready to realize the plastic chassis. Following a few raw photos of the materials A video with the …
I added the Mechanics section. It contains a full and detailed description of the mechanics and of the chassis of MyzharBot.
After a lot of searching on the web I realized that using 2.5″ M3 tapped spacers to keep the basis of the tracks separated at the right distance is not as easy as it seemed. Spacers long 2.5″ are not easy to be found and what I found is not …
Added a new page about the making of the chassis of the robot. It will contain each file needed to send to a laser cutting service to realize a solid chassis made of plastic or wood.